Immersion heaters for direct heating of liquids
Immersion heaters for
water, oil and process fluids
Immersion heaters are a simple and efficient solution when a liquid needs to be heated directly in a tank, vessel or process installation. Because the heating element is installed in the medium, the energy is transferred directly to the liquid. This provides a compact solution with good heat utilisation when the immersion heater is correctly sized for the task.
Immersion heaters are used, among other things, to heat drinking water, circulating water, demineralised water, cleaning baths, lubricating oil, hydraulic oil, heat transfer oil and degreasing baths. They can also be part of solutions for steam, saturated steam, air and nitrogen, depending on the design and choice of materials.
The right solution depends primarily on the medium. Water, oil and chemical liquids place different requirements on watt density, material, sealing, temperature control and safety. An immersion heater for water therefore cannot automatically be used for oil or aggressive liquids. Oil, for example, has a different thermal conductivity than water and often requires a different assessment of power and watt density.
Standard immersion heaters and customised solutions
At Newtronic, we supply both standard immersion heaters and customised solutions. The standard range covers many common needs where dimensions, power, thread, material and terminal box match the task.
Customised immersion heaters are relevant when the standard solution does not fit the tank, the medium, the power requirement or the installation conditions. This may involve special dimensions, other voltages, specific immersion depths, flange mounting, special nipples, moulded versions, cable mounting or requirements for digital control.
We are happy to get involved early in the design phase so the immersion heater is correctly integrated into the system from the outset. This provides better opportunities to optimise installation, service life, service access and operational reliability.
Material selection and watt density
The material of the immersion heater must be selected based on the medium and operating conditions. Stainless steel is often used for many water and process applications, while Incoloy may be relevant at higher temperatures or with more demanding media. Brass and nickel-plated copper may also be relevant in certain applications.
Watt density has a major impact on service life. If the power is too high relative to the medium, deposits, overheating or local temperature peaks can occur on the heating element. This is particularly important with oil, liquids with low thermal conductivity, stagnant media, or liquids with a risk of limescale, particles or chemical attack.
Therefore, an immersion heater should not be selected solely based on kW and thread. It must be sized based on the medium, temperature, tank volume, heat-up time, circulation, installation position and control requirements.
Control, thermostat and over-temperature protection
Many immersion heaters are supplied with a terminal box, thermostat and over-temperature protection. This provides an integrated and practical solution where both operating temperature and safety can be handled close to the heating element. Newtronic’s immersion heater range includes, among other things, solutions with and without a terminal box, thermostat and over-temperature protection, as well as terminal boxes in IP65 and IP54.
For more demanding systems, the immersion heater can be combined with an external temperature sensor, controller, contactor, solid state relay, power controller or a complete control panel. This is relevant when there are requirements for precise temperature control, alarm handling, step control, digital control or integration with PLC/supervisory control system.
Correct temperature control is important for both the process and service life. If the immersion heater is controlled too imprecisely, the temperature may fluctuate unnecessarily. If the safety function is missing or incorrectly positioned, there may be a risk of overtemperature, dry running or damage to the heating element.
Immersion heaters as part of a complete heating solution
An immersion heater may seem like a simple component, but in industrial systems it is often an important part of a complete heating solution. That is why we review the entire application before recommending a solution.
This includes, among other things, the tank size, the properties of the medium, the desired final temperature, heat-up time, power requirement, installation conditions, insulation, cleaning, service access and documentation requirements. In some cases, a threaded immersion heater is the right solution. In other cases, a flange heater, a circulation heater or a complete tank heating solution is more suitable.
At Newtronic, we advise on the selection of immersion heater, materials, power, control and safety so the solution fits both the process and the operating environment. We supply immersion heaters for both simple tasks and more demanding industrial applications where adaptation, documentation and technical support are required.
Contact us about immersion heaters
Do you need an immersion heater for heating water, oil or another process fluid? Send us details about the medium, temperature, volume, desired heat-up time, voltage and installation conditions. We will help size the right solution.
FAQ
An immersion heater is typically installed directly in a tank or vessel and is used to heat liquids such as water, oil and process fluids. A cartridge heater, by contrast, is a compact heating element that is usually installed in a drilled hole in, for example, a tool, mould, nozzle or machine part, transferring heat to the surrounding material.
Not necessarily. Water and oil have different properties and therefore impose different requirements, including watt density, material selection, and temperature control. An immersion heater sized for water should therefore not automatically be used for oil without verifying that the design and power rating are suitable for the medium.
The required power depends, among other things, on the volume of liquid, the properties of the medium, the starting temperature, the desired final temperature, and the required heating time. Heat losses from the tank, piping, and surroundings should also be included. Therefore, the immersion heater should be sized for the specific process rather than based solely on the tank size.
Watt density describes how much power is emitted from the surface of the heating element. If the load is too high relative to the medium and heat dissipation, local overheating, deposits and a shorter service life may occur. This is particularly important with oil, stagnant media and liquids with a risk of limescale or other deposits.
It depends on the application, but temperature control and overtemperature protection should always be assessed. Many immersion heaters can be supplied with a thermostat and a separate safety function. For more demanding processes, control can instead be handled with an external temperature sensor, controller, power controller, or control panel.



